X2· Tocadiscos
The X2 is a belt-drive turntable with a 9-inch carbon/aluminium sandwich tonearm, 2 kg acrylic platter and electronic 33/45/78 RPM speed change. It suits vinyl listeners wanting an adjustable high-end deck, and has since been superseded by the X2 B.
- Belt drive, 33/45/78 RPM with electronic speed change
- 30 mm thick, 2 kg acrylic platter
- 9" carbon/aluminium sandwich one-piece tonearm
- Adjustable azimuth and VTA
- Optional Pick it 2M Silver cartridge
- Connect it E semi-balanced RCA phono cable included
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un X2, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The X2 is a belt-drive turntable built around a 30 mm, 2 kg acrylic platter and a stainless steel/brass main bearing. A DC/AC generator board supplies the motor, and speed is switched between 33, 45 and 78 RPM with a single button. The motor chassis is balanced and suspended on a tuned TPE belt, which decouples it from the main plinth.
The 9" one-piece carbon/aluminium sandwich tonearm has no separate headshell and a wider tube than the X1's arm. Its extra mass suits low-compliance MC cartridges. Azimuth and VTA are fully adjustable, and the arm comes with a TPE-damped counterweight. Three height-adjustable damped aluminium feet support the deck. It can be bought with or without the Pick it 2M Silver cartridge, which uses silver-plated copper coils, and is offered in High Gloss, Satin and Real Wood finishes.
The deck connects to an amplifier's phono input through the supplied Connect it E semi-balanced RCA phono cable. It is powered by an external 15 V DC power supply. This page covers the original X2; an updated X2 B with a True Balanced Connection is also available.
Vídeo
Especificaciones
- Marca
- Pro-Ject
- Modelo
- X2
- Categoría
- Hi-Fi y audio doméstico › Tocadiscos
Drive
- Speeds
- 33, 45, 78 (electronic speed change)
- Principle
- belt drive
- Speed variance
- 33: 0.25% 45: 0.20%
- Wow & flutter
- 33: 0.12% 45: 0.10%
- Signal to noise
- 70 dB
Platter and bearing
- Platter
- 30mm thick, 2 kg heavy acryl
- Main bearing
- stainless steel/brass
Tonearm
- Tonearm
- 9” carbon/aluminium sandwich
- Effective arm length
- 230 mm
- Overhang
- 18 mm
- Effective tonearm mass
- 13,5g
- Tracking force range
- 0 - 30mN
Connectivity
- Phono cable
- Connect it E, semi-balanced RCA
Power
- Power supply
- 15 volts DC / 0,8A
- Power consumption
- 4,5 watts max / 0.3 watt standby
Physical
- Dimensions
- 460 x 150 x 340 mm (WxHxD)
- Weight
- 10 kg
- Finishes
- High Gloss, Satin, Real Wood
In the box
- Included accessories
- 15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat
- Cartridge
- Available with or without Pick it 2M Silver