PMC6 XBD
The PMC 6 XBD is a twin-cabinet active studio monitor system made of a PMC6 two-way nearfield monitor and a PMC8 SUB subwoofer, both using ATL bass loading. It suits professionals who want midfield-level reference monitoring and bass extension down to 25Hz in a compact installation.
- PMC6 plus PMC8 SUB, twin-cabinet 3-way active system
- Response 25Hz-25kHz (-3dB) with sub, versus 39Hz for PMC6 alone
- Class-D amps: HF 200W, LF 200W, SUB 300W
- Analogue or AES3 digital XLR input, up to 192kHz
- AES3 through output and RJ45 for SoundAlign control
- 5-band parametric EQ, delay, polarity, 3 user presets
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un PMC6 XBD, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The XBD configuration pairs the PMC6 active monitor with the PMC8 SUB active subwoofer. Together they extend the low-frequency response from 39Hz to 25Hz and turn the PMC6 into a three-way design. With the subwoofer handling the lowest bass, the mid-bass driver is relieved of that load, which lowers distortion, adds headroom and improves mid-range clarity for vocals.
The PMC6 has a 150mm (6") LF driver and a 27mm (1") soft dome HF driver, driven by Class-D amplifiers (200W for HF, 200W for LF, 300W for the sub in XBD use). Its XLR input switches between analogue and AES3 digital (16/24-bit, 18-192kHz). DSP functions include crossover, driver protection, 5-band parametric EQ, shelving filters, a high-pass filter, delay and polarity. Three user presets are available in addition to the factory defaults.
To set up the system, connect the input to the PMC6 and run an AES3 cable from its digital through output to the PMC8 SUB. The cabinets connect to a LAN or directly to each other through their RJ45 network ports. Selecting XBD mode makes the DSP treat them as one monitor. They can then be configured from the rear panel or in a browser with SoundAlign, where the pair appears as a single PMC6 XBD unit.
Vídeo
Especificaciones
- Marca
- PMC
- Modelo
- PMC6 XBD
- Categoría
- Estudio › Monitores de estudio
Audio
- Type
- 3-way active, twin cabinet, mid-field reference monitor with ATL bass loading
- Frequency response (system)
- 25Hz - 25kHz (-3dB @1m full space, on-axis)
- PMC6 frequency response
- 39Hz - 25kHz (-3dB) (@1m full space, on-axis)
- PMC8 SUB frequency response
- 25Hz - 500Hz (-3dB) (@1m full space, on-axis)
- PMC6 sensitivity
- +4dBu input signal = 98dB SPL @ 1m
- PMC6 max continuous SPL
- 106dB @1m
- PMC6 max peak SPL
- 118dB @1m
- PMC8 SUB max continuous SPL
- 109dB @1m
- PMC8 SUB max peak SPL
- 121dB @1m
- Latency
- 2.4mS
Drivers
- PMC6 LF driver
- PMC 150mm (6") studio 6 driver
- PMC6 HF driver
- PMC 27mm (1") soft dome tweeter
- PMC8 SUB driver
- PMC 200mm (8") studio 8 driver
- PMC6 effective ATL length
- 1.8m (5.9ft)
- PMC6 directivity
- H +/-60 degrees, V +50/-40 degrees (-6dB off axis @10kHz)
Amplification
- Amplifier power
- HF 200W, LF 200W, SUB (XBD) 300W
- PMC6 amplifier power per channel
- LF 1 x 200Wrms, HF 1 x 200Wrms
Inputs
- Input
- XLR switchable between analogue & digital AES3
- Analogue max input level
- +20/+24dBu (selectable)
- Analogue input impedance
- 22K ohm
- Digital input
- 16/24-bit AES3, left, right or left + right
- Digital sample rate
- 18 - 192kHz
- Digital input impedance
- 110 ohm
- Expansion card slot
- For future connectivity upgrades
Outputs
- Digital through output
- XLR digital AES3 (fixed 24-bit @ 96kHz)
Connectivity
- Network
- RJ45 for use with PMC SoundAlign web interface
DSP and controls
- Level trim
- +/-10dB
- PMC6 orientation
- Portrait, landscape, auto
- PMC6 high-pass filter
- 20 - 200Hz, 12dB/Oct
- PMC8 SUB high-pass/low-pass filter
- 20 - 200Hz, 12dB/Oct
- Delay
- 0 - 30mS
- Phase
- Normal or inverted
- LF & HF shelving filters
- 20Hz - 20kHz, +/-10dB, Q 0.707
- Parametric EQ
- 5 bands, 20Hz - 20kHz, +/-10dB
- User presets
- 3 + factory defaults
Power
- Mains
- 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- PMC6 power consumption (idle)
- 35W
- PMC6 power consumption (max)
- 400W
- PMC8 SUB power consumption (idle)
- 25W
- PMC8 SUB power consumption (max)
- 300W
Physical
- PMC6 dimensions (portrait)
- H 400mm (15.7") x W 215mm (8.5") x D 372mm (14.6")
- PMC6 dimensions (landscape)
- H 215mm (8.5") x W 400mm (15.7") x D 372mm (14.6")
- PMC6 weight
- 11.1kg (24.4lbs) each
- PMC8 SUB dimensions
- H 266mm (10.5") x W 551mm (21.7") x D 440mm (17.3")
- PMC8 SUB weight
- 18.5kg (40.8lbs) each