KH 805
Active studio subwoofer with a 10-inch driver and a bypassable 2.0/0.1 bass manager built around an 80 Hz fourth-order crossover. It is the stereo-oriented sibling of the KH 810, meant to extend Neumann KH monitors in music, broadcast and post-production rooms.
- 10" (265 mm) shielded driver, 200 W woofer amplifier
- Free-field response 18–300 Hz (±3 dB)
- 110.7 dB SPL max at 3% THD, 1 m, half space
- Bypassable 80 Hz, 4th-order bass manager
- Four LFE routing modes incl. daisy chain for arrays
- XLR balanced I/O with ground lift
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un KH 805, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The KH 805 AG is a wooden-cabinet active subwoofer with a 265 mm (10") magnetically shielded long-throw driver, two large bass reflex ports and a 200 W woofer amplifier. Its free-field response runs 18–300 Hz (±3 dB), and it reaches 110.7 dB SPL at 3% THD in half space. It can raise the maximum level of the main monitors by up to 8 dB and lower their distortion.
A bypassable bass manager with an 80 Hz, 24 dB/oct crossover handles stereo and externally bass-managed setups. Four routing modes are available: right channel bass management, LFE to the subwoofer only up to 120 Hz, a wide mode for multichannel systems that manage bass in the source, and a daisy-chain mode for subwoofer arrays. Management can be switched remotely with a foot switch. Acoustic adjustment comes from input gain, output level, an 8-position phase control, a continuous low cut and a bypassable parametric EQ.
Connections are electronically balanced XLR inputs and outputs, including a daisy-chain output, plus a ground lift. The universal switched-mode power supply covers 100–240 V. The electronics can be remoted with the optional REK 3 kit, and protection comes from peak and thermal limiters, soft clip and excursion limiting.
Especificaciones
- Marca
- Neumann
- Modelo
- KH 805
- Categoría
- Estudio › Monitores de estudio
Inputs
- Analog inputs
- 2 x XLR: analog electronically balanced
- Input impedance
- >13k Ohms
- Max. input level
- +24 dBu
- CMRR
- > 56 dB @ 15 kHz
- Input gain control (sensitivity)
- +2 ... -12 dB
Outputs
- Output level control (1 m, 0 dBu input)
- 100; 114 dB SPL
- Woofer amplifier output power (10% THD+N, limiter off)
- 200 W
- Woofer amplifier output power (0.1% THD+N, limiter off)
- 160 W
Audio
- Free field frequency response ±6 dB
- 17 … 600 Hz
- Free field frequency response ±3 dB
- 18 … 300 Hz
- Bass extension (-6 dB)
- 17 Hz
- Max. SPL in half space at 3% THD, 1 m (50–100 Hz avg.)
- 110.7 dB SPL
- Maximum output level
- 116.7 dB SPL
- Sine wave output, THD < 0.5% at 1 m in half space
- 95 dB SPL (>45 Hz)
- Max. long term SPL, pink noise at 2.3 m (single / pair)
- 112 dB SPL
- Self-generated noise at 10 cm
- <20 dB(A) SPL
- Crossover frequency
- 80 Hz
- Crossover slope
- 24 dB/oct; 4th order
- Infrasonic filter
- 6.5 Hz; 12 dB/oct.
- Max. listening distance
- up to 6 m
- Woofer
- 265 mm (10") with magnetic shielding and black metal grille
Connectivity
- Remote control
- Bass management on/off via standard foot switch (optional) on 6.3 mm jack
- Volume control
- NRC 1 hardware remote or RS-232
Power
- Mains voltage; frequency
- 220-240 / 100-120 V (switchable); 50/60 Hz
- Power consumption, full output
- 280 W
- Power consumption, idle
- 14 W
Physical
- Dimensions (H x W x D)
- 360 x 330 x 645 mm (14.2" x 13" x 25.4")
- Weight
- 26 kg (57 lbs 5 oz)
- Cabinet material
- Wood cabinet, aluminum electronics panel
- Finish
- Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
- External net volume
- 76.6 liters
- Packed dimensions (H x W x D)
- 515 x 490 x 750 mm (20 1/4" x 19 1/4" x 29 1/2")
- Packed weight
- 32.0 kg (70 lbs 9 oz)
In the box
- Contents
- 1 x KH 805 Subwoofer, 3 x Mains cables (European, UK and US), 1 x Operating manual, 1 x Supplement "Getting Started Quickly"