JVM210 Head
A 100W all-valve guitar amplifier head with two channels, each with its own volume and a switchable master, plus digital reverb and two effects loops. Built in the UK for guitarists who need both clean and distorted tones at high stage volume.
- 100W all-valve head, 4 x EL34 power valves
- Two channels with a switchable master volume per channel
- Digital reverb and two effects loops (series/parallel and series)
- Programmable footswitch included for mode, master and reverb
- Emulated XLR line out, MIDI In and MIDI Thru
- Designed, engineered and made in the UK
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un JVM210 Head, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The JVM210 Head is a 100W valve amplifier head with two channels and three gain stages. Each channel has its own gain, bass, middle, treble, volume and reverb controls, while presence and resonance are shared. A master volume can be switched for each channel, so a lead channel can be set louder than a rhythm one. Sound is produced by four EL34 power valves, with four ECC83 preamp valves and a further ECC83 as phase splitter.
Settings for mode, master and reverb can be stored and recalled with the programmable footswitch that comes with the amp. There is digital reverb on board, and two effects loops, one series/parallel and one series.
Speaker connection is through five 1/4" jack sockets that cover 16, 8 and 4 ohm loads. An emulated line output on XLR is provided, along with MIDI In and MIDI Thru for control. The amp is designed, engineered and hand-assembled at the maker's UK factory, and is finished in black. It weighs 22 kg.
Vídeo
Especificaciones
- Marca
- Marshall
- Modelo
- JVM210 Head
- Categoría
- Guitarras y bajos
General
- Model
- JVM210 Head
- Range
- JVM
- Channels
- 2 (Multi)
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- 100W
- Preamp valves
- 4 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 4 x EL34
- Effects
- Digital reverb
- Effects loop
- 2, 1 x series parallel, 1 x series
Controls
- Controls
- Channel and mode select (button), gain, treble, middle, bass, volume and reverb (per channel), presence, resonance, master volume select, master volume (switchable for each channel)
Inputs
- Instrument input
- 1 x 1/4" jack
- MIDI
- MIDI In
- Footswitch
- Footswitch input
Outputs
- Speaker outputs
- 5 x 1/4" jack sockets (16Ω load / 8Ω load / 4Ω load)
- Line out
- Emulated Line Out (XLR)
- MIDI Thru
- Yes
Physical
- Weight
- 22 kg / 49 LB
- Width
- 740 mm / 29.1"
- Height
- 310 mm / 12.2"
- Depth
- 215 mm / 8.5"
- Country of origin
- Designed and engineered in UK. Made in UK
In the box
- Footswitch
- PEDL-91006 included
- Power cable
- Detachable power cable included
- Speaker cable
- Speaker cable included