H20
Stereo power amplifier with dual-mono construction, rated at more than 200 W per channel into 8 ohms. It is aimed at home hi-fi systems that need a high-current amplifier fed from a preamp, with balanced XLR or unbalanced RCA inputs.
- More than 200 W + 200 W into 8 ohms, dual mono
- RCA unbalanced and XLR balanced inputs
- Two pairs of gold plated speaker terminals
- Damping factor above 1000
- 20 bipolar output transistors, 1000 VA power supply
- Black finish, 18 kg
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un H20, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The H20 is a two-channel power amplifier built on the design of the maker's H30 reference amplifier. It uses the maker's SoundEngine modules, which are laser trimmed, together with a current-capable output stage of 20 bipolar transistors. The power supply is dual mono, rated at 1000 VA with 90,000 μF of capacitors, and the damping factor is stated as more than 1000.
The chassis has a bead blasted, anodized front panel with a single button and bead blasted, anodized top and side covers. The front panel alone uses well over 1.5 kg of aluminium. The unit is finished in black and weighs 18 kg.
Signal comes in through either RCA unbalanced or XLR balanced inputs. Two pairs of gold plated speaker terminals are provided on the output side. The amplifier runs on 100, 120 or 230 V AC, and draws 60 W when switched on in standby.
Vídeo
Especificaciones
- Marca
- Hegel
- Modelo
- H20
- Categoría
- Hi-Fi y audio doméstico › Amplificadores
Inputs
- Input types
- RCA unbalanced and XLR balanced
- Input impedance
- Balanced 10 kohm, unbalanced 50 kohm
Outputs
- Speaker outputs
- Two pairs of heavy-duty gold plated terminals
- Output power
- > 200 W + 200 W in 8 ohms @ 1kHz 1% THD
- Output stage
- 20 pcs 15 A 200 W high speed, ultra-low distortion bipolar transistors
Audio
- Frequency response
- Less than +/- 0.2 dB deviation 20 Hz - 20 kHz
- Phase response
- Less than 2 degrees deviation 20 Hz - 20 kHz
- Signal to noise ratio
- More than 100 dB
- Crosstalk
- Less than -100 dB
- Distortion
- Less than 0.006% at 100 W 8 ohm
- Intermodulation
- Less than 0.01% (19 kHz + 20 kHz)
- Damping factor
- More than 1000
- Channel configuration
- Dual mono
Power
- Power supply
- 1000 VA dual mono, 90,000 μF capacitors
- Mains voltage
- 100/120/230V AC
- Power consumption
- 60 W in standby switched on
Physical
- Finish
- Black
- Dimensions (HxWxD)
- 14,5 cm x 43 cm x 37 cm
- Weight
- 18 kg
- Dimensions US (HxWxD)
- 5.7" x 17" x 15"
- Weight US
- 39,7 lbs