C54
A rack-mountable multi-channel power amplifier from Hegel's C5 series, offered in 3-, 4- or 5-channel versions. The listed specification is for the four-channel unit, rated at 150 W per channel into 8 ohms, for home theatre, bi-amping, studio or commercial installs.
- 4 channels, 150 W each into 8 ohms (300 W into 4, 600 W into 2)
- SoundEngine2 error-cancelling, damping factor above 2000
- Balanced XLR and unbalanced RCA input on every channel
- Per-channel gain (23/29 dB) and phase (0/180) switches
- Trigger in and out for remote switching and daisy chaining
- 19-inch rack design with detachable rear mount ears
Fotos
6Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un C54, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The C54 belongs to the Hegel C5 series of configurable multi-channel power amplifiers. The series comes in 3-, 4- and 5-channel versions, so one or more units can drive a 5.1 or Atmos home theatre, bi-amped or actively crossed-over speakers, a mastering studio or a restaurant. The C54 is the four-channel model, rated at 150 W per channel into 8 ohms.
It uses Hegel's SoundEngine2 error-cancelling topology, which lets the class A/B output stage run at low bias and stay cooler, so it can be installed in a 19-inch rack. The damping factor is above 2000 and distortion is under 0.01% at 100 W into 8 ohms. Each channel has its own switchable gain (23 or 29 dB) and phase (0/180 degrees) setting, which helps when integrating it into a larger system.
Every channel accepts a balanced XLR or an unbalanced RCA input. A 12 V trigger input and output allow remote switching and daisy chaining, so the amplifier can sit in another room. The chassis is 3U with integrated front rackmount ears and adjustable, detachable rear mount ears. Feet are supplied for use outside a rack.
Vídeo
Especificaciones
- Marca
- Hegel
- Modelo
- C54
- Categoría
- Hi-Fi y audio doméstico › Amplificadores
Audio
- Power output
- 4 x 150/300/600 W into 8/4/2 ohms @ 1kHz 1% THD, 100/120/230V AC
- Minimum load
- 2 ohms
- Frequency response
- 5 Hz - 100 kHz
- Signal-to-noise ratio
- More than 100 dB
- Crosstalk
- Less than -100 dB
- Distortion
- Less than 0.01% @ 100W 8 Ohms 1 kHz
- Intermodulation
- Less than 0.01% (19 kHz + 20 kHz)
- Damping factor
- More than 2000 (main power output stage)
Inputs
- Analog inputs
- 4 x balanced (XLR), 4 x unbalanced (RCA)
- Control input
- 1 x mini-jack 5-12 V trigger
Outputs
- Control output
- 1 x mini-jack 11,9 V trigger out
Controls
- Gain control
- Switchable between 23 dB or 29 dB (individual)
- Phase control
- Switchable 1/180 (individual)
- Special features
- Balanced and unbalanced inputs, Trigger in/out, Modular design, Adjustable rear rack mount, Gain & Phase selectors
Physical
- Net weight
- 33 kg (73 lbs)
- Gross weight
- 38,5 kg (85 lbs)
- Dimensions
- 48,2 cm x 13,2 cm x 52 cm (BxHxD incl handles, ex feet)
- Dimensions (US)
- 18.97 in x 5.2 in x 20.47 in (BxHxD incl handles, ex feet)
- Rack height
- 3U
- Mounting
- Integrated front rackmount ears; adjustable, detachable rear mount ears
In the box
- Accessory box
- Feet supplied