F300i LCR
A compact 2-way centre channel loudspeaker from the F300i Series, built for wall-mounted home AV installations. It can also serve as a stereo or surround speaker and suits entry-level home cinema setups.
- Compact LCR speaker for centre, stereo or surround use
- 2 x 125mm multi-fibre bass/mid drivers plus 25mm titanium tweeter
- D'Apolitto driver layout for a wide sound stage
- 90dB sensitivity, 8 Ohm nominal impedance
- Shallow 120mm-deep cabinet suited to wall mounting
- Sold as a single unit; Black Ash, Light Oak, Walnut
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un F300i LCR, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The F300i LCR is a closed-box centre channel based on the cabinet and driver layout of the F300C, with a shallower cabinet so it sits neatly on a wall. The crossover and tweeter are upgraded, which the maker says gives a more refined treble. Besides centre duty, it can be used as a stereo or surround speaker.
Two 125mm multi-fibre bass/mid drivers flank a 25mm titanium dome tweeter in a D'Apolitto arrangement for a wide sound stage. The crossover point is 3.4kHz, using a 2nd order low-pass and 1st order high-pass filter. Sensitivity is 90dB, and the speaker presents a nominal 8 Ohm load. Recommended amplifier power is 25-100W RMS.
The speaker connects with conventional speaker terminals to an AV receiver or amplifier. It is supplied as a single unit and comes in Black Ash, Light Oak and Walnut finishes. The cabinet measures 156 x 400 x 120mm and weighs 4.4kg.
Vídeo
Especificaciones
- Marca
- Fyne Audio
- Modelo
- F300i LCR
- Categoría
- Hi-Fi y audio doméstico › Altavoces
Audio
- System type
- 2 way, closed box
- Sensitivity (2.83 Volt @ 1m)
- 90dB
- Nominal impedance
- 8 Ohm
- Frequency response (-6dB typical in room)
- 80Hz - 34kHz
- Crossover frequency
- 3.4kHz
- Crossover type
- 2nd order low pass, 1st order high pass
Drivers
- Drive unit complement
- 2 x 125mm multi-fibre bass / mid. 1 x 25 mm titanium dome tweeter
Power
- Recommended amplifier power (Watt RMS)
- 25- 100
- Continuous power handling (Watt RMS)
- 50
Physical
- Dimensions (H x W x D)
- 156 x 400 x 120mm (6.1 x 15.8 x 4.7")
- Net weight (each)
- 4.4kg (9.7lbs)
- Finishes
- Walnut / Black Ash / Light Oak
- Series
- F300i Series
- SKU
- F8000055
In the box
- Supplied as
- Single unit