R101BT
Edifier Descatalogado

R101BT

Entry-level 2.1 powered speaker system with two small satellites and a 4-inch downward-firing subwoofer in an MDF cabinet. It takes Bluetooth 4.0 or AUX input and suits desktop or TV listening.

  • 2.1 system: two satellites plus a 4-inch subwoofer
  • Bluetooth 4.0 and AUX inputs
  • Subwoofer in an MDF enclosure, downward firing
  • Magnetically shielded subwoofer and satellites
  • Total RMS output: 2W x 2 satellites, 4.5W subwoofer
  • Side-mounted control panel on the subwoofer
Vender uno igual

Fotos

8

Anuncios

Aún no hay anuncios de este modelo

Cuando alguien venda un R101BT, aquí aparecerán los anuncios y el historial de ventas.

Vender uno igual

Descripción

The R101BT is a compact 2.1 system made up of a subwoofer and a pair of angled satellite speakers. The subwoofer has a vertical cube-shaped MDF cabinet with a 4-inch (106 mm) driver firing downward. The dual magnetic circuit design shields it magnetically, so it can sit near a monitor or TV without distorting the picture.

The satellites each have a 13 mm treble unit and are also magnetically shielded. They are tilted to point the sound toward the listener. Total RMS output is 2 W x 2 from the satellites and 4.5 W from the subwoofer, with a stated frequency response of 50 Hz to 20 kHz.

Sources connect through either Bluetooth (version 4.0) or a wired AUX input. The control panel is on the side of the subwoofer, which keeps the controls within easy reach. The finish is black.

Vídeo

Especificaciones

Marca
Edifier
Modelo
R101BT
Categoría
Hi-Fi y audio doméstico › Altavoces

Audio

Total output power (RMS), L/R (treble)
2W x 2
Total output power (RMS), SW (bass)
4.5W
Frequency response
50Hz - 20kHz
Signal-to-noise ratio, L/R
≥85 dB (A)
Signal-to-noise ratio, SW
≥70 dB (A)

Drivers

Treble unit
Φ 13 mm x 2
Bass unit
106 mm (4-inch)
Satellite midrange driver
2-inch by 2 ¾-inch
Subwoofer enclosure
MDF

Inputs

Audio inputs
AUX, Bluetooth
Input sensitivity, AUX L/R
500 ± 50 mV
Input sensitivity, AUX SW
320 ± 20 mV
Input sensitivity, Bluetooth L/R
450 ± 50 mFFS
Input sensitivity, Bluetooth SW
450 ± 20 mFFS

Connectivity

Bluetooth version
V4.0

Physical

Dimensions satellites (W x H x D)
68mm x 166mm x 86mm
Dimensions subwoofer (W x H x D)
162mm x 226mm x 206mm

Datos: edifier.com; fotos: Edifier product page · actualizado 2026-10-13 · ¿Has visto un error? Escríbenos