Riverside
Riverside is a hybrid analog/DSP drive and distortion pedal for guitar, covering light overdrive through heavy saturated distortion. It suits players who want tube-style drive with two gain channels, a 3-band EQ and MIDI-capable control in a compact pedalboard format.
- Class-A JFET analog input stage with up to 20dB of gain
- Low and high gain channels plus a mid-boost Push switch
- 3-band EQ and 3-position Presence switch
- Favorite preset switch and optional noise reduction
- Expression, volume mode and MIDI via the Expression jack
- True bypass or analog buffered bypass
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Riverside, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
Riverside combines a class-A JFET analog input stage, which adds up to 20dB of gain, with SHARC DSP gain stages. The Drive knob changes several circuit parameters at once, so the response stays tuned as the gain is raised. A Gain switch selects a looser low-gain channel or a tighter high-gain channel, and a Push switch adds a mid-range emphasis after the analog stage.
Tone shaping comes from independent Bass, Middle and Treble controls placed after the drive stages, plus a three-position Presence switch for the top end. A Favorite footswitch stores and recalls one preset, and secondary functions provide a variable-threshold noise reduction (downward expander) and a Boost Level setting of up to +6dB.
The unit has a mono input and output, a Boost jack for an external switch, and an Expression jack that handles expression control, volume mode and MIDI. The Boost jack can also trigger the Favorite setting on other Strymon pedals. MIDI gives access to 300 preset locations and control of all knobs and switches. Bypass is relay-based true bypass or a selectable analog buffered bypass.
Vídeo
Especificaciones
- Marca
- Strymon
- Modelo
- Riverside
- Categoría
- Efectos y pedales
Audio
- Topology
- Custom cascading multistage distortion
- Analog input stage
- Class-A JFET, up to 20dB of analog gain
- DSP
- SHARC DSP
- Converters
- 24-bit 96kHz A/D and D/A
- Processing
- 32-bit floating point
- Gain channels
- Low and High
- EQ
- 3-band (Bass, Middle, Treble)
- Presence switch
- 3-position (Minus, Enhanced, Plus)
Inputs
- Instrument input
- High impedance mono
- Expression input
- Expression mode or Volume mode (logarithmic taper)
- Boost input
- External switch for up to +6dB of analog boost
Outputs
- Audio output
- Mono
- Boost jack (Favorite Out mode)
- TRS cable to the EXP input of another Strymon pedal
Connectivity
- MIDI
- Via Expression jack with MIDI EXP Cable
- MIDI preset locations
- 300
- Favorite input
- External MiniSwitch to recall the Favorite preset
Controls
- Knobs
- Drive, Level, Bass, Middle, Treble
- Switches
- Gain, Push, Favorite, On
- Bypass
- True Bypass (electromechanical relay) or selectable Analog Buffered Bypass
Power
- Power requirement
- Max 9V DC center-negative, min 250mA
- Connector
- 5.5mm x 2.1mm barrel
- Power supply
- Not included
Physical
- Dimensions (D x W x H)
- 4.5" (11.43 cm) x 4" (10.16 cm) x 2.4" (6.1 cm)
- Chassis
- Anodized gold aluminum
- Origin
- Designed and built in the USA