Twin-City
The Twin-City is an active ABY amp switcher that lets a guitarist or bassist select between two amplifiers or run both at once. It uses a class-A buffer and a transformer-isolated output to keep switching quiet and avoid hum.
- Active ABY amp switcher with class-A input buffer
- Transformer-isolated output B removes ground-loop hum
- 180° polarity reverse switch phase-matches two amps
- Ground lift switch on the unit
- Drag Control input load correction for natural pickup tone
- Works with guitar or bass amps and as a channel switcher
Fotos
6Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Twin-City, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Twin-City takes one instrument signal and sends it to two amplifiers, either one at a time or together. A class-A input buffer drives the outputs, which keeps switching silent and protects the signal from noise and gain loss. It can also be used to switch channels on vintage amps by feeding each channel from one output, or to select between two bass amps.
Hum and buzz from combining amps are addressed in several ways. Output B has an isolation transformer, and there are a ground lift switch and a 180° polarity reverse switch so both amps play in phase. At the input, Drag Control load correction recreates the load a tube amp places on the pickups, so the instrument keeps its natural tone.
The unit sits between the instrument and the two amplifiers, with an output for each amp. A user guide, owner's manual and part number R800 7115 00 are listed for the model.
Vídeo
Especificaciones
- Marca
- Radial Engineering
- Modelo
- Twin-City
- Categoría
- Sonido en directo › Otro equipo de sonido en directo
Audio
- Type
- Active ABY amp switcher
- Input buffer
- Class-A
- Input load correction
- Drag Control
- Polarity
- 180° polarity reverse switch
Outputs
- Amp outputs
- 2 (A and B)
- Output B isolation
- Isolation transformer
- Output modes
- Switch between amps or drive both simultaneously
- Ground lift
- Switch
Connectivity
- Compatible amps
- Two guitar amps or two bass amps
- Channel switching
- Outputs can feed two channels of one amp
Physical
- Maker
- Radial Engineering
- Part number
- R800 7115 00
In the box
- Documentation
- Owner's manual and user guide available