ESL 2812
Floor-standing electrostatic loudspeaker with four panel elements and a fixed 3-degree tilt, from Quad's ESL series. It suits listeners who want a full-range electrostatic design with a mylar diaphragm and an 8 ohm nominal load.
- Floor-standing dipole with 3 degree fixed tilt
- Multiple electrostatic drive membranes, 4 panel elements
- Frequency response 37Hz - 21kHz (-6dB)
- 8 ohms nominal impedance, varying 4-15 ohms
- Sensitivity 86 dB/2.83 V RMS equivalent
- Composite aluminium / steel chassis
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un ESL 2812, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The ESL 2812 is a floor-standing dipole electrostatic loudspeaker and part of the latest generation of Quad's ESL range. It keeps the mylar diaphragm used throughout the series, while the circuitry and components have been re-evaluated. Four panel elements make up the drive system, and progressive concentric rings provide the time delay.
The chassis is a heavy-duty composite of aluminium and steel, and the speaker has a fixed 3-degree tilt. Nominal impedance is 8 ohms, varying between 4 and 15 ohms. Sensitivity is stated as 1.5 mbar per volt referred to 1 m, equivalent to 86 dB at 2.83 V RMS. Frequency response is 37 Hz to 21 kHz at -6 dB, and 33 Hz to 23 kHz usable.
Continuous input is rated at 10 V RMS, with programme peaks of 40 V for undistorted output and a permitted peak of 55 V. The ESL 2812 sits alongside the ESL 2812X, ESL 2912 and ESL 2912X in the range. A brochure and manual are available for download.
Vídeo
Especificaciones
- Marca
- Quad
- Modelo
- ESL 2812
- Categoría
- Hi-Fi y audio doméstico › Altavoces
General
- Model
- ESL 2812
- Format
- Floor standing dipole with 3 degree fixed tilt
- Type
- Multiple Electrostatic Drive Membranes
- Time Delay
- Progressive Concentric Rings
- Panel Elements
- 4
Audio
- Frequency Response
- 37Hz - 21kHz (-6dB)
- Frequency Response (useable)
- 33Hz - 23kHz
- Maximum Output
- 2 N/m_ at 2m On Axis
- Sensitivity
- 1.5mbar Per Volt Referred To 1m (86 dB/2.83 V RMS Equivalent)
- Distortion above 1000Hz (100dB at 1m)
- 0.15%
- Distortion above 100Hz (100dB at 1m)
- 0.5%
- Distortion above 50Hz (100dB at 1m)
- 1.0%
Electrical
- Impedance
- 8 Ohms Nominal
- Impedance Variation
- 4-15 Ohms
- Maximum Continuous Input Voltage (RMS)
- 10V
- Programme Peak For Undistorted Output
- 40V
- Permitted Peak Input
- 55V
Physical
- Chassis Structure
- Heavy Duty Composite Aluminium / Steel