Origin20 Combo
Single-channel 20W all-valve combo amplifier with a 10-inch Celestion VT-Junior speaker, aimed at guitarists who want clean to crunchy tones at different volume levels. Powerstem power scaling lets it run at 20W, about 3W or about 0.5W.
- 20W all-valve combo with one channel
- Powerstem power scaling: 20W, ~3W or ~0.5W
- 10" Celestion VT-Junior speaker, 16Ω, 50W
- Tilt control and pull-boost gain
- Switchable series FX loop and DI output
- 2-way footswitch for boost and loop
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Origin20 Combo, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Origin20 Combo is a one-channel valve guitar amplifier built around two EL34 power valves and three ECC83 valves in the preamp and phase splitter. Its Powerstem power scaling lowers the voltage rails around the power amplifier, so output can be set to 20W, approximately 3W or approximately 0.5W without switching the valve operating mode.
Tone is shaped with Gain (with a pull boost), Tilt, Bass, Middle, Treble, Master and Presence controls. The Tilt control moves the sound from a standard tone toward a high-treble voicing, in the manner of the multi-input approach of older Marshall amplifiers. A 2-way footswitch operates the gain boost and switches the series effects loop on and off. The amp has no built-in effects.
The instrument connects to a single 1/4" input. Rear connections include three 1/4" speaker outputs for 16Ω or 8Ω loads and a 1/4" DI output. The 1x10" Celestion VT-Junior speaker (16Ω, 50W) is fitted in a black cabinet that weighs 13.9 kg.
Vídeo
Especificaciones
- Marca
- Marshall
- Modelo
- Origin20 Combo
- Categoría
- Sonido en directo › Amplificadores
General
- Model
- Origin20C
- Range
- Origin
- Channels
- 1
- Technology
- Valve
- Colour
- Black
Audio
- Output wattage
- High power 20W, mid power approx 3W and low power approx 0.5W
- Controls
- Gain (pull boost), Tilt, Bass, Middle, Treble, Master, Presence, Powerstem power scaling
- Effects
- None
- Effects loop
- Yes, 1 x series, switchable
Valves
- Preamp valves
- 2 x ECC83, 1 x ECC83 (phase splitter)
- Power amp valves
- 2 x EL34
Speakers
- Speaker configuration
- 1x10"
- Speaker model
- Celestion VT-Junior (16Ω, 50W)
- Unit impedance
- 16Ω
Inputs
- Instrument input
- 1 x 1/4" jack, footswitch
Outputs
- Speaker outputs
- 3 x 1/4" jack sockets (16Ω load / 8Ω load)
- DI output
- 1/4" jack
Physical
- Weight
- 13.9 kg / 31 lbs
- Width
- 520 mm / 20.5"
- Depth
- 240 mm / 9.4"
- Country of origin
- Designed and engineered in UK. Made in Vietnam.
In the box
- Footswitch
- PEDL-90016 included
- Power cable
- Detachable power cable included