Ci160RR-THX
A 6.5-inch Uni-Q architectural loudspeaker for discreet in-ceiling or in-wall mounting, part of KEF's Ci-R Series and THX Certified Ultra. It suits home cinema and multi-room installs where a high output and a concealed speaker are both needed.
- 6.5 in. Uni-Q driver with 25 mm tweeter at the acoustic centre
- THX Certified Ultra architectural loudspeaker
- Universal Cut-out matches any 160 mm KEF speaker
- Max SPL 105 dB at 1 m, 90 dB sensitivity
- 4 ohm nominal impedance, 10-190 W recommended amplifier power
- Mounting depth of 110 mm from the surface
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Ci160RR-THX, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Ci160RR-THX is a round architectural speaker that fits flush into a ceiling or wall. Its Uni-Q driver places a 25 mm (1 in.) high-frequency tweeter at the acoustic centre of a 165 mm (6.5 in.) woofer, so the sound stays consistent across the listening area. The crossover frequency is 2.1 kHz, and the nominal coverage is stated as 130.
It is certified THX Ultra for architectural loudspeakers. To meet the THX Certified Ultra distortion specification, it should be installed with a 3 litre rear enclosure and the A/V processor speaker size set to small. Frequency response is 52 Hz - 24 kHz (±6 dB) open-backed. The speaker is rated at 90 dB sensitivity and 4 ohm nominal impedance, and reaches a maximum SPL of 105 dB at 1 m.
A Universal Cut-out system gives it the same opening as any 160 mm KEF speaker, which simplifies installation and choosing among models. It mounts 110 mm deep from the surface. A rear volume of at least 10 litres is needed, with 20 litres ideal. It is driven by an external amplifier rated 10-190 W, and a 38 Hz high-pass filter is recommended.
Vídeo
Especificaciones
- Marca
- KEF
- Modelo
- Ci160RR-THX
- Categoría
- Sonido en directo › Otro equipo de sonido en directo
Audio
- Frequency response
- 52Hz - 24kHz (±6DB) Open-Backed
- Frequency range
- 38Hz-30kHz (-10DB)
- Sensitivity
- 90dB (2.83V/ 1m)
- Nominal impedance
- 4 Ohms
- Nominal coverage
- 130
- Maximum SPL measured at 1m
- 105 dB
- Crossover frequency
- 2.1kHz
- Recommended high-pass filter
- 38Hz
Drivers
- LF driver
- 165mm (6.5in.) Uni-Q
- HF driver
- 25mm (1in.)
Power
- Recommended amplifier power
- 10-190W
Installation
- Mounting depth from surface
- 110mm (4.33in.)
- Ideal rear volume
- 20 L
- Minimum rear volume
- 10 L
- THX Ultra distortion spec rear enclosure
- 3 litre, speaker size set to small
Physical
- Net weight
- 2.94kg (6.48lbs.)
- Dimensions (H x W x D)
- 234.6 mm x 115 mm x 234.6 mm (4.53 in. x 4.53 in. x 9.24 in.)
Certification
- Certification
- THX ULTRA