VR2-11514
The VR2-11514 is a passive two-way full-range loudspeaker in a bass reflex birch plywood cabinet, with a 15" woofer and a 1.4" compression driver. It is meant for fixed installations that must carry both voice alarm and music, and it carries EN 54-24 certification.
- Passive 2-way, 15" woofer plus 1.4" compression driver
- 350 W RMS, 700 W program, 1400 W peak, 8 ohms
- Max. SPL peak 130 dB; sensitivity 100 dB (1 W/1 m)
- EN 54-24 Type B voice alarm certified
- Three horn variants, each rotatable by 90°
- Optional IP 55 version; ball impact resistant (DIN 18032-3)
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un VR2-11514, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The VR2-11514 is a passive 2-way mid/high unit for installations. It pairs a 15" neodymium cone driver with a 1.4" B&C compression driver behind a 12 dB/oct. passive crossover set at 990 Hz. The rated power handling is 350 W RMS, 700 W program and 1400 W peak, with a maximum peak SPL of 130 dB.
The high-frequency horn comes in three versions: 60° x 40°, 90° x 55° or an asymmetrical 60-90° x 55°. Each can be rotated by 90°, so coverage can be matched to the room. The cabinet is coated inside and outside and has a steel front grille with an anticorrosive finish. Rigging points are on the sides, lid, bottom and back. The speaker is certified for voice alarm use under EN 54-24 (Type B, outdoor area) and for ball impact resistance under DIN 18032-3. It is rated IP 33 C, with an optional IP 55 version.
Connection is through screw terminals with a contact protection cover, with a second set of terminals for a parallel output. DSP presets and filter data are offered for Lab.gruppen, Lake, Powersoft, Ashly and QSC Q-SYS processors.
Especificaciones
- Marca
- HK Audio
- Modelo
- VR2-11514
- Categoría
- Sonido en directo › Altavoces PA
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 350 W
- Power handling program
- 700 W
- Power handling peak
- 1400 W
- Nominal impedance
- 8 Ohms
- Max. SPL peak
- 130 dB
- Sensitivity 1 W/1 m
- 100 dB
- Crossover frequency
- 990 Hz
- Frequency range -6 dB
- 62 Hz - 16 kHz
- Frequency range -10 dB
- 55 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- depending on horn variant
Components
- Low frequency
- 1 x 15" cone speaker with neodymium magnet and 3" voice coil
- High frequency
- 1 x 1.4" B&C compression driver with ferrite magnet and 3" voice coil
- Crossover
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn
- 60° x 40°, 90° x 55° or 60-90° x 55° (asymmetrical), each rotatable by 90°
EN 54
- Nominal noise power (EN 54 signal)
- 350 W
- Sensitivity 1 W/4 m
- 87 dB
- Max. SPL (nominal power/4 m/EN 54 signal)
- 111 dB
- Voice alarms (EN 54-24:2008)
- certified (Typ B, Outside area); 1438-CPR-0754 (CNBOP-PIB)
Connectivity
- Input
- 1x Screw terminals with contact protection cover
- Output/parallel output
- 1x Screw terminals with contact protection cover
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP protection class (EN 60529)
- IP 33 C as standard; IP 55 as special version optional (PG gland with 3 m fixed cable connection)
Physical
- Cabinet material
- Birch plywood
- Cabinet surface
- 2-component textured coating (housing is coated on the inside and outside)
- Rigging
- 4 x M10 on the side, 6 x M10 Lid/bottom, 3 x M10 on the back
- Front grille
- Steel front grille with anticorrosive coating and external acoustic fabric, optionally hydrophobic or flame retardant
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog (over 30 colors)
- Dimensions (W x H x D)
- 40.5 x 81.2 x 51.9 cm (15-15/16 x 31-31/32 x 20-7/16 inch)
- Weight
- 30.6 kg (67.5 lbs)
In the box
- Accessories included
- Cover plate with cable gland