VR 11214
Passive two-way full-range loudspeaker in a bass-reflex cabinet with a 12" woofer and 1.4" compression driver, intended for fixed installations in dry indoor spaces. It is rated at 350 W RMS and is ball-impact certified for sports halls.
- Passive 2-way, 12" woofer + 1.4" compression driver
- 350 W RMS / 700 W program / 1400 W peak
- Max SPL peak 129 dB; sensitivity 99 dB (1 W/1 m)
- Three horn variants, each 90° rotatable
- Ball impact certified to DIN 18032-3
- Speakon NL4 input plus screw-terminal parallel output
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un VR 11214, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The VR 11214 is a passive two-way loudspeaker for permanent installation in protected indoor areas. A 12-inch neodymium cone driver handles bass and midrange, and a 1.4-inch compression driver covers the highs through a built-in passive crossover at 990 Hz with 12 dB/octave slopes. The cabinet is a bass-reflex design in MDF with an acrylic enamel finish and a coated steel front grille.
The horn comes in three variants (60° x 40°, 90° x 55° or an asymmetric 60-90° x 55°), and each can be rotated by 90° to fit the room's coverage needs. Rated power is 350 W RMS, 700 W program and 1400 W peak, with a maximum peak SPL of 129 dB. The cabinet is certified for ball impact under DIN 18032-3, which suits gyms and sports halls.
The input is a single Speakon NL4, with a parallel output on screw terminals under a contact protection cover. Rigging points on the sides, lid, bottom and back allow wall, ceiling or flown mounting with the maker's accessories. Filter and preset files are available for Lab.gruppen, Powersoft, Lake and QSC Q-SYS processing. Standard colours are black and white, with other RAL colours available.
Especificaciones
- Marca
- HK Audio
- Modelo
- VR 11214
- Categoría
- Sonido en directo › Altavoces PA
Audio
- Concept
- Passive 2-way mid/high unit
- Cabinet principle
- Bass reflex
- Power handling RMS
- 350 W
- Power handling program
- 700 W
- Power handling peak
- 1400 W
- Nominal impedance
- 8 Ohms
- Max. SPL peak
- 129 dB
- Sensitivity 1 W/1 m
- 99 dB
- Crossover frequency
- 990 Hz
- Frequency range -6 dB
- 72 Hz - 16 kHz
- Frequency range -10 dB
- 62 Hz - 20 kHz
- Dispersion angle -6 dB (H x V)
- depending on horn variant
Components
- Low frequency
- 1 x 12" Sica cone speaker with neodymium magnet and 3" voice coil
- High frequency
- 1 x 1.4" B&C compression driver with ferrite magnet and 3" voice coil
- Crossover slopes
- High pass: 12 dB/oct., Low pass: 12 dB/oct.
- Horn
- 60° x 40° or 90° x 55° or 60-90° x 55° (asymm.), each 90° rotatable
Connectivity
- Input
- 1x Speakon NL4
- Output/parallel output
- 2x Screw terminals with contact protection cover
- Pin assignment
- 1+/- (Input)
Physical
- Cabinet material
- MDF
- Cabinet surface
- 1-component-acrylic enamel
- Rigging points
- 4 x M10 on the side, 6 x M10 Lid/bottom, 3 x M10 on the back
- Color
- Jet black (RAL 9005), Signal white (RAL 9003) or special color according to catalog (over 30 colors)
- Front grille
- Steel front grille with anticorrosive coating and with external acoustic fabric, flame retardant as standard
- Dimensions (W x H x D)
- 40.5 x 74.2 x 41.9 cm (15-15/16 x 29-7/32 x 16-1/2 inch)
- Weight
- 26.0 kg (57.3 lbs)
Certifications
- Ball impact resistance (DIN 18032-3)
- certified (MPA Uni Stuttgart)
- IP protection class (EN 60529)
- not specified (installation only in dry indoor areas)
Software
- Amping/Presets
- Lab.gruppen IPX Series, IPD Series, Lake; Powersoft Armonia+; QSC Q-SYS (Filter container)
- Filter sheets
- Lab.Gruppen IPD Serie, IPX Serie; WAV files of the filter curves