PLASMA VOICE EURORACK
Plasma Voice is a 16HP Eurorack synthesizer module that produces sound from electrical discharges in a xenon-filled plasma tube. It works as a standalone voice with no external sound source and suits modular synthesists looking for an unusual sound source.
- 16HP Eurorack module with a xenon plasma tube sound source
- 49 sounds in 7 banks: Bass, Lead, Pluck, Drum, Metal, Static, Spark
- Analog drive, bass/treble EQ, 12 dB/oct LP/HP state variable filter and VCA
- 7 CV inputs, 1V/Oct pitch, 5 trigger modes and 7 accent modes
- 3.5 mm MIDI input with DIN5 adapter; firmware update via SysEx
- Lifetime warranty; power supply not included
Fotos
5Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un PLASMA VOICE EURORACK, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
Plasma Voice drives a xenon-filled gas tube with a proprietary ultrasound pulse-width oscillator. The discharge between two electrodes is picked up and turned into analog audio by a rectifier circuit. The oscillator is modulated by 49 digital sound engines arranged in 7 banks: Bass, Lead, Pluck, Drum, Metal, Static and Spark. Unlike earlier Plasma products, which acted as distortion units, this module needs no external source.
Six centre-indent sliders cover pitch, time, modulation, harmonics, flux and filter, and an ALT button reaches fine tune, accent and filter resonance. Five attenuverters, seven CV inputs (including one assignable multi-CV input) and trigger and accent inputs allow patch control. The analog path has a soft-clipping drive, bass and treble EQ, a state variable filter (12 dB/oct low-pass or high-pass) and an output VCA.
A 3.5 mm MIDI input accepts notes, velocity, CC, program change, pitch wheel and mod wheel, and firmware can be updated over MIDI SysEx. The module runs from a standard ±12 V Eurorack ribbon cable; a power supply is not included.
Vídeo
Especificaciones
- Marca
- Gamechanger Audio
- Modelo
- PLASMA VOICE EURORACK
- Categoría
- Sintetizadores y teclados › Modular (Eurorack)
Sound engine
- Sound source
- Xenon-filled plasma tube with proprietary tube driver and electromagnetic discharge detector
- Sounds
- 49 transformable SOUNDS across 7 BANKS
- Banks
- Bass, Lead, Pluck, Drum, Metal, Static, Spark
Analog signal path
- Drive
- Soft clipping DRIVE circuit
- EQ
- BASS and TREBLE frequency boost/cut
- Filter
- Analog state variable VCF, selectable 12dB/Oct LP or HP, with resonance amplifier
- VCA
- Analog output VCA
- Audio output level
- +/-8V max
Controls
- Sliders
- 6 center indent: PITCH, TIME, MOD, HARM, FLUX, FILTER
- Pitch range
- +/- 1 oct (fine tune and octave settings available)
- Attenuverters
- 5 center indent for CV inputs
- Buttons
- ALT, manual TRIGGER / GATE, CLUTCH
- Encoder
- Push & turn encoder with 7:7 LED indicator
Inputs
- CV inputs
- 7 (one per slider plus 1 assignable MULTI CV)
- Pitch CV
- 1V/Oct, +/-10V range
- Parameter CV
- +/-5V range
- Trigger and accent inputs
- 2V minimum, rising and falling edge detect
- Trigger modes
- 5: TRIG, GATE, LOOP, OSC, ON/OFF
- Accent modes
- 7: ACC, DUCK, STARVE, CVFREEZE, JUMP, REVERSE, BURST
Connectivity
- MIDI input
- 3.5mm MIDI IN jack (DIN5 to 3.5mm adapter included)
- MIDI support
- Notes, Velocity, CC panel control, PC BANK & SOUND change, PC settings change, Channel 10 General Percussion Key Map, Pitchwheel, Modwheel
- Firmware update
- Potential firmware update via MIDI SysEx
Power
- Voltage
- +/-12V DC (10-16 pin cable included)
- Power draw
- Peak 220mA at +12V (mean 75mA), 35mA at -12V, 0 at +5V
Physical
- Size
- 16HP (W x H: 81.3 x 128.5mm)
- Max depth
- 35mm excl. knobs, 54mm incl. knobs
- Mass
- 190g
In the box
- Included
- DIN5 to 3.5mm MIDI adapter, 10-16 pin power cable
- Not included
- Power supply
- Warranty
- Lifetime Warranty