Vintage Ten
The Vintage Ten is a floorstanding two-way loudspeaker in a walnut-finished birch ply cabinet, aimed at small and medium-sized listening rooms. It uses a 250mm IsoFlare driver with a titanium dome tweeter and a downward-firing BassTrax port.
- 2-way floorstander with 250mm IsoFlare point source driver
- 75mm titanium alloy dome compression tweeter
- Downward-firing BassTrax port with Tractrix diffuser
- Sensitivity 94dB, nominal impedance 8 Ohm
- HF energy and Presence controls, +/- 3dB each
- Birch ply cabinet with walnut trim, 54.6 each
Fotos
8Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Vintage Ten, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Vintage Ten is a two-way floorstanding loudspeaker with a relatively slim handcrafted cabinet, intended to fit visually into small and medium rooms. The enclosure is birch ply with oiled walnut and solid walnut trim, with extensive internal bracing.
Its 250mm (10") IsoFlare point-source driver has a multi-fibre bass/midrange cone and a FyneFlute roll surround, with a 75mm titanium alloy dome compression tweeter at its centre on a neodymium magnet system. Bass comes from a downward-firing port working with the BassTrax Tractrix diffuser. The crossover is bi-wired, passive, low loss and Deep Cryogenically Treated, with a 750Hz crossover frequency.
Two adjustments help tune the speaker to the room: a high frequency energy control (750Hz to 26kHz, +/- 3dB) and a presence control (2.5kHz to 5.0kHz, +/- 3dB). Sensitivity is 94dB with an 8 Ohm nominal impedance, and the speaker is sold per pair. It belongs to the Vintage Series.
Vídeo
Especificaciones
- Marca
- Fyne Audio
- Modelo
- Vintage Ten
- Categoría
- Hi-Fi y audio doméstico › Altavoces
Audio
- System type
- 2 way, downwards firing port, with BassTrax Tractrix diffuser
- Frequency response (-6dB typical in room)
- 26Hz- 26kHz
- Sensitivity (2.83 Volt @ 1m)
- 94dB
- Nominal impedance
- 8 Ohm
- Crossover frequency
- 750Hz
- Crossover type
- Bi-wired passive low loss, 2nd order low pass, 2nd order high pass, Deep Cryogenically Treated
- System adjustments
- High frequency energy (750Hz - 26kHz) +/- 3dB; Presence (2.5kHz - 5.0kHz) +/- 3dB
Drivers
- Drive unit complement
- 1 x 250mm IsoFlare point source driver, multi-fibre bass / midrange cone, with 75mm titanium alloy dome compression tweeter, neodymium magnet system
Power
- Recommended amplifier power (Watt RMS)
- 20 - 280
- Peak power handling (Watt)
- 560
- Continuous power handling (Watt RMS)
- 140
Physical
- Dimensions - HxWxD
- 1040 x 468 x 489mm (40.9 x 18.4 x 19.3")
- Net weight - each
- 54.6
- Finishes
- Walnut
- Cabinet construction
- Birch ply with oiled walnut and solid walnut trim, extensive internal bracing
- S-Trax position (from cabinet front edge)
- 124mm (4.9")
- SuperTrax position (from cabinet front edge)
- 100mm (3.9")
General
- Series
- Vintage Series
- SKU
- F8000042
- Colour options
- Walnut, Clear
- Sold as
- Per pair