Afterneath Eurorack
A 16HP Eurorack version of the Afterneath reverb with a fully analog dry path and a fully digital wet path. It suits modular players who want a modulatable, self-oscillating reverb/delay with CV control and an external feedback loop.
- 16HP Eurorack reverb with analog dry and digital wet paths
- Four CV inputs (Drag, Mode, Diffuse, Length) with attenuverters
- Nine Drag modes, including 1V/octave and quantized scales
- Reflect Send/Return jacks for external feedback processing
- Input level handles instrument-level to modular-level signals
- Draws 95 mA from +12V; skiff friendly at 31.75 mm deep
Fotos
7Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Afterneath Eurorack, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Afterneath module is a digital reverb built from many short delay lines, packaged for Eurorack. It has one audio input, one audio output, a Reflect send and return pair for the feedback path, and nine front-panel controls. The dry signal stays analog, while the wet signal is entirely digital.
The Drag control separates the delay lines, moving the sound between delay-like and reverb-like behaviour and shifting pitch when sound is in the buffer. Mode selects one of nine response curves for Drag and its CV input, including unquantized, slewed, 1V/octave and several quantized scales. Dampen, Diffuse, Length, Reflect and Mix shape tone, smoothness, decay, regeneration and wet/dry balance, and Dry Kill removes the dry signal. High Length and Reflect settings cause self-oscillation.
Drag, Mode, Diffuse and Length each have a CV input with a dedicated attenuverter. The Input knob adapts the level from instrument-level to modular-level sources. Reflect Send and Return allow external processing of the feedback path, and Return can also work as an extra audio input. The module uses a standard 10-pin power header and is shallow enough for skiff cases.
Vídeo
Especificaciones
- Marca
- EarthQuaker Devices
- Modelo
- Afterneath Eurorack
- Categoría
- Sintetizadores y teclados › Modular (Eurorack)
Inputs
- Audio input
- 1 (instrument-level to modular-level, set by Input knob)
- Reflect Return
- 1 (also usable as an additional audio input)
- CV inputs
- 4 (Drag, Mode, Diffuse, Length)
- Drag CV response range
- 1.6 V to 4.1 V (positive voltages only)
Outputs
- Audio output
- 1
- Reflect Send
- 1 (does not interrupt the internal feedback path)
Controls
- Knobs
- Input, Dampen, Reflect, Mix, Drag, Mode, Diffuse, Length
- Switch
- Dry Kill
- CV attenuverters
- 4 (Drag, Mode, Diffuse, Length)
- Mode indicator
- Mode LED
- Total controls
- 9
Audio
- Dry signal path
- Completely analog
- Wet signal path
- Totally digital
- Drag modes
- 9
- Quantized modes
- Chromatic, Major, Minor, Pentatonic, Octaves & Fifths, Octaves (1V/octave)
- Other modes
- Unquantized, Unquantized with Slew, Unquantized Volt/Octave
Power
- Current draw
- 95 mA from +12V rail
- -12V / +5V draw
- 0 mA
- Power connector
- Standard 10-pin Eurorack header, negative pins marked
Physical
- Width
- 16HP
- Max depth
- 31.75 mm (less than 1.25 inches, skiff friendly)
- Artwork
- Matt Horak
Support
- Warranty
- Limited lifetime warranty
- Documentation
- Operation manual available for download