EPICON 6
DALI Descatalogado

EPICON 6

Floorstanding loudspeaker from DALI's discontinued EPICON series, built around two 6½-inch wood-fibre woofers and a hybrid soft-dome/planar tweeter. Aimed at home hi-fi listeners who want a wide-dispersion, low-distortion stereo speaker.

  • Two 6½-inch wood-fibre woofers with SMC magnet system
  • Hybrid tweeter: 29 mm soft dome plus 10 x 55 mm planar
  • Frequency range 35–30,000 Hz (±3 dB)
  • Sensitivity 88 dB, nominal impedance 5 ohms
  • Cabinet of 6 MDF layers with no parallel surfaces
  • Recommended amplifier power 50–300 W
Vender uno igual

Fotos

5

Anuncios

Aún no hay anuncios de este modelo

Cuando alguien venda un EPICON 6, aquí aparecerán los anuncios y el historial de ventas.

Vender uno igual

Descripción

The EPICON 6 is a floorstanding speaker using a 2½ + ½-way design. Two 6½-inch low/mid drivers with wood-fibre cones are made at the maker's Danish facilities and use a Soft Magnetic Composite magnet system intended to reduce distortion. Crossover points are 700 Hz, 2,550 Hz and 15,000 Hz.

High frequencies come from a hybrid module that pairs a 29 mm soft dome with a 10 x 55 mm planar tweeter. The planar element reaches down to 2.5 kHz and gives continuous wide dispersion as the dome becomes more directional higher up. The cabinet has curved sides with no parallel surfaces and is built from 6 layers of MDF. Separate internal chambers let each woofer be tuned individually, with a bass port directly behind each one.

The cabinet is available in a satin black finish, and a removable grille is shown on the product page. Connection is by passive speaker cable from an amplifier rated for 50 to 300 watts. The model now sits in the maker's discontinued range.

Vídeo

Especificaciones

Marca
DALI
Modelo
EPICON 6
Categoría
Hi-Fi y audio doméstico › Altavoces

Audio

Sensitivity [2.83V/1m]
88 dB
Maximum SPL [@ 1m]
110 dB
Frequency range [+/- 3 dB]
35 - 30,000 Hz
Nominal impedance
5 ohms
Crossover frequencies
700 / 2,550 / 15,000 Hz
Crossover principle
2½ + ½-way

Drivers

Low/mid frequency drivers
2 x 6½ inch
High frequency drivers
1 x 29 mm soft dome, 1 x 10 x 55 mm planar
Woofer cone material
Wood fibre
Magnet system
Soft Magnetic Composite (SMC)

Power

Recommended amplifier power
50 - 300 watts

Physical

Cabinet construction
6 layers of MDF (multilayer laminate)
Cabinet design
Rounded form, no parallel surfaces
Porting
Bass port behind each woofer
Finish
Black (Satin)
Grille
Included as shown (Show Grille option)

Datos: dali-speakers.com; fotos: DALI product page · actualizado 2026-10-11 · ¿Has visto un error? Escríbenos