Cloudlifter CL-4
Four-channel passive-circuit mic activator that adds up to +25 dB of clean gain to low-output microphones, powered only by phantom power from the preamp. Suited to live sound, studios, podcasts and houses of worship that use ribbon, dynamic or tube mics.
- Four independent channels
- Up to +25 dB of gain for passive microphones
- Powered by phantom power alone
- Does not pass phantom power to the mic
- Class-A discrete JFET circuitry, 3 kOhm load
- Steel build, made in Tucson, Arizona
Fotos
7Anuncios
Aún no hay anuncios de este modelo
Cuando alguien venda un Cloudlifter CL-4, aquí aparecerán los anuncios y el historial de ventas.
Vender uno igualDescripción
The Cloudlifter CL-4 is a rack-style mic activator with four independent channels. Each channel sits between a microphone and a preamp and raises the signal by up to 25 dB before it reaches the preamp, so the preamp can run in a lower, quieter part of its gain range. It is aimed at low-output sources such as passive ribbon, dynamic and tube microphones.
The circuit uses Class-A discrete JFET gain stages with a direct signal path and an input load of 3 kOhm. It takes its power from the phantom supply of the preamp or interface and needs nothing else. It does not pass phantom power on to the microphone, which keeps passive ribbon microphones safe. Mics that need +48 V, such as condensers, require a separate phantom supply.
Besides microphones, the inputs accept the output of a passive DI box, a wireless receiver, or a battery-powered microphone such as a shotgun or electret. The unit has a steel chassis, is built by hand in Tucson, Arizona, and carries a limited lifetime warranty with registration.
Vídeo
Especificaciones
- Marca
- Cloud Microphones
- Modelo
- Cloudlifter CL-4
- Categoría
- Estudio › Previos y outboard
Audio
- Channels
- 4 independent
- Maximum gain
- Up to +25 dB
- Circuit
- Patented Class-A discrete JFET
- Input impedance loading
- 3 kOhm (optimal)
- Compatible microphones
- Passive dynamic, ribbon and tube mics
Inputs
- Input sources
- Passive microphones, passive DI output, wireless receiver output, battery-powered microphones
- Connector type
- XLR
Power
- Power requirement
- Phantom power only
- Phantom pass-through
- No, phantom is not passed to the microphone
- Phantom for condenser mics
- Separate +48 V supply required
Physical
- Construction
- Rugged steel
- Design
- Rugged, portable
- Manufacture
- Handcrafted in Tucson, Arizona and on the Navajo Nation
Connectivity
- Signal path
- Sits between microphone and preamp
- Preamp interface
- Mic preamp or audio interface with phantom power
Warranty
- Warranty
- Limited lifetime with registration